Washer Repair in Memphis — Book a Visit Today

Water on the laundry room floor gets attention quick. So does a drum that fills and then just sits there. We track down the real cause: a clogged drain pump, a worn door boot on a front loader, a bad lid switch, a shot shift actuator, or bearings that scream during spin. Loads coming out soaked usually mean drainage, not the motor. Memphis homeowners from 38104 to Cordova call us for top loaders and front loaders alike, every major brand. Describe the noise or the leak when you reach us, or use the quote form.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Common washer faults in Memphis homes

Water's just sitting in the tub Usually a clogged drain pump, a jammed impeller, or a kinked drain hose keeping the water from leaving.
It shakes hard enough to walk across the floor Worn suspension rods, tired shock absorbers, or failed drum bearings let the tub swing out of balance during spin.
Clothes come out soaked after spin Points to a weak spin cycle — drive belt, motor coupler, or a lid switch that never confirms the door is shut.
Machine stops mid-cycle and flashes a code Control board, water level sensor, or door lock faults commonly interrupt a cycle and park the machine there.
Something smells sour and there's water on the floor Cracked hoses, a leaking tub seal, or a biofilm-packed detergent drawer and gasket are the usual sources.

Memphis coverage

We cover Memphis ZIPs including 38103, 38104, 38107, and 38109, plus nearby Bartlett, Germantown, Cordova, and Millington.

Other repairs we do in Memphis

All washer repair → · All Memphis services →

Washer Repair in Memphis — quick answers

Is my washer worth repairing or should I replace it?

Depends on the failure. A pump, valve, belt, or door lock is routine work on a machine with years left. A failed outer tub bearing on an older unit is a bigger job. Our technician tells you which one you're facing.

What should I do about the water still in the drum?

Leave it if you can. Moving a full tub sloshes water into the cabinet. If you need it out, set the drain hose end low into a bucket and let gravity work, then towel up what spills.

Do you work on front load and top load washers?

Both. Front loaders bring gasket leaks, bearing noise, and door lock faults. Top loaders bring lid switches, motor couplers, and drain pump clogs. Our technicians carry common parts for both styles and diagnose either on site.

Why does my washer smell even after I clean it?

Smell usually lives where you can't reach — the drain pump filter, the boot gasket fold, or the detergent dispenser channel. Biofilm builds there and survives surface cleaning. A technician can pull those pieces and clear them out.

How soon can you get to my house in Memphis?

Memphis is on our regular route, so we schedule appointment windows rather than making you wait all day. Call us with your ZIP and a short description of the symptom — no heat, won't drain, won't start. That helps us bring the right parts on the first trip.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what the appliance does and does not do. Noises, error codes, smells, puddles. Brand and model help. That detail lets us plan the visit right.
Step 2
We diagnose in person
A technician comes to your kitchen or laundry room and tests the machine instead of guessing. Controls, heating parts, motors, seals, drains. You hear what failed and what the repair involves before work starts.
Step 3
You approve the repair
Nothing gets replaced until you say go. Common parts are handled on site when we have them. If a part must be ordered, we tell you that up front and schedule the return.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Symptoms, not scriptsA washer that fills but never spins is a different problem than one that spins but never drains. We ask questions that narrow it down, then confirm with testing. Guesswork wastes parts and your afternoon.
Independent and brand-wideWe are not tied to any manufacturer. That means we work on the big laundry and kitchen names side by side, and we recommend the repair that makes sense for your machine, not one brand's playbook.
Regional coverageBased in Huntsville, we serve homeowners in Alabama, Georgia, Tennessee, Kentucky, Mississippi, Louisiana, Arkansas, North Carolina and South Carolina. One number to call whether you are in a city neighborhood or a small town outside it.
Straight explanationsYou will hear what part failed and why, in plain words. If a machine is worn past sensible repair, we say so. Homeowners make better decisions when nobody is hiding behind jargon.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.